24 Channel LED DMX Decoder, 5-24VDC, 3A/CH
$189.50
SKU
PLP-LT-880
Overview
Output is 24 channels, typically 8 sets of Red, Green and Blue.
Converts standard DMX signal to PWM output suitable for driving 5, 12, and 24 VDC LED lighting.
Channels 1-12 and 13-24 are powered by separate voltage inputs, allowing strands of two different voltages to be addressed simultaneously.
DMX Amp terminal features an amplified signal for DMX Output.
DIP switches on the side allow you to set the decoder’s lowest address so it uses the address you desire from your DMX program. Each decoder has a DMX device address you can set.
9 preset test functions - enabled when DIP switch 10 is set ON.
This 24 channel DMX512 decoder can control up to 24 different 12 VDC LED products or 8 RGB LED light bars or strips. The decoder is made to be compatible with any brand of DMX controller console and signaling rates and uses an 8-bit standard DMX transmission. Decoder can run in stand-alone mode using Address code switches or under DMX-512 digital control signals using XLR or RJ45 DMX-512 Input/Output interfaces. DMX decoding driver converts universal DMX512/1990 digital signal to PWM signal, which can be controlled by DMX512 console with 16-bit gray scale output per channel. Maximum load is 3 amps per channel—72 Amps total.
Write Your Own Review