Pixel-by-Pixel Control DMX RGB LED Strip,  32/m, 5V, 5m

Pixel-by-Pixel Control DMX RGB LED Strip, 32/m, 5V, 5m

Pixel-by-Pixel Control DMX RGB LED Strip, 32/m, 5V, 5m

$109.50
SKU
PLP-DMX-5050-32
Overview
This model requires 5V power from both ends, is cuttable every LED, and mountable using 3M adhesive tape. This dmx512 led strip is 5 way output ( 5V, PI/PO address writing wire, A(Dmx+),B(Dmx-), GND), Don't need decoder . as the MAX485 is inside the DMX512 IC, It can be cut ,can be parallel and series connection.

LED Chip Type: High Quality SMD 5050 RGB
Input Voltage: 5V DC
Max Power: 7.68W/m
Control Method: DMX512 Control
LED Density: 32 LEDs/m
IC Density: 32 IC/m
Each Segment (Pixel) includes 1 LEDs, and 1 IC.
Channels / Pixels: 3 Channels per Pixel
LED wavelengths: 630nm/530nm/475nm
Strip Width:14mm
Strip Length: 5m
Finish: white
Waterproof: Nonwaterproof with 3M tape on the back, IP67 water resistant silicone sleeve
Working temperature: -40 ℃ ~ 60 ℃
Lifespan: MTBF≥50000h

Write Your Own Review
You're reviewing:Pixel-by-Pixel Control DMX RGB LED Strip, 32/m, 5V, 5m
Your Rating